Tips for amusement equipment maintenance

Tips for amusement equipment maintenance

 For the manufacturers who purchase the amusement park rides is a daily and important issue, then what maintenance should be done for amusement equipment? The following list several major amusement equipment maintenance methods:
1.Plastic and glass fiber parts, can be scrub with a soft cloth or soft brush after dilution and soaking with soap water, disinfectant detergent powder and bleaching powder, etc., and then rinse off with clear water, with a clean cloth to dry or dried, and finally sprayed 84 disinfectant.
2.The soft sponge part can be scrub with a soft cloth dipped in soapy water, or placed in the sunlight to disinfect.

amusement park rides

3.Humidity-resistance,heat resistant and non - fading wooden parts, can be dried after washing with soap bubble, and then spray 84 disinfectant to disinfect.
4.Metal parts if asked to rust, brush away the rust, wipe with dry cloth;You can away bout 20 cm distance to sweep and spray oil paint with Sanhe brand blowing oil paint after exposure in the sun,spray it again after dry to play a protective effect role,to clean, dry and disinfect after all the oil paint is dry.
5.When Cleaning the electric circuit, first of all to ensure that power is off, prohibit to watered, generally with a damp cloth to scrub, then connect the power supply until it is dry.

6.All amusement equipment,there shouldn’t have hydrops after rainy day in outdoor slide and drill tube parts;if there have ,then you need to play a 4 mm diameter hole to drainage at the lowest place .
7.If it is indoor activities rooms, floors, walls, etc., daily ultraviolet radiation disinfection, indoor ventilation, weekly with hydrogen peroxide sprayed disinfectant once.
8.At the same time must to check whether the connection part is solid, and whether metal frequent activities connection part , electrical appliances and common parts are damaged.